His and Hers Vivoactive HR watches - how are we getting on?

Update 5 April 2020:

Anna's Vivoactive HR watch is still going strong, although the battery life is dropping off,
and it needs charging perhaps twicea week now, rather than the once a week it was before.
My Vivoactive HR watch is still soldering on, cracked screen and all.
Yeah, it has lost some functionality, but it still does most of what I want.

Doing it, not just talking about it!

Hi,
I'm still here
More than two years since the crash (in which I badly broke my shoulder), I am mostly "back to normal".
Or course, I am still in my 50s, so I have the issues from that ;-)

Anyway, while a basic test of fitness might be something like a Cooper Test (run one mile in twelve minutes - and, no, it isn't very hard), a better test of my current ability might be just how far can I run.

So I did.
Two days ago -  and here it is on Strava (at top of post)

Weight to lose

The biggest place I can lose weight is off myself.
I can lose the entire weight of the bike and still only be at the low end of "normal".

But apart from that, where could I save a bit off the bike?

Affordable Weight Fanaticism (Again!)

Used, but freshly cleaned, pg850 11-32 cassette.

Hmm. I shaved, and weighed my beard.
Because every gram counts, right?
(3 grams was all it weighed!)

On a more sensible note, I have been thinking about aluminium rear cogs.
If one can buy an affordable chainring in 6061 or 7075, why do there seem to be few (if any) similarly sized rear cogs available.
I'm not taking about the small sizes, like 11s through to 20-ish.
I am talking about the larger rear cogs, like 28 to 36.

Topping up the Exercise

A modest evening walk, because calories are calories, and walking is better than watching TV!
Also builds the legs up, if you are not used to running yet.
Even though the heart rate is under my Zone 1 throughout.

So, you've done the main exercise activity for the day.

30 minutes, say, of intense sweating.
You really couldn't do that again today.

Time for a nice sit down in front of the TV for the evening, then?

There is another choice.

The Long Slow Run - Getting A Bit Muddy On A Lap Round Town.

The Long Slow Run - it's not High Intensity!
My "threshold" is between the two short bars on the far right.
The two tallest bars are at about 85% and 90% of my threshold.
(this is a screenshot of a real run taken from my Training Peaks account)

The Long Slow Run.
A classic training technique.

It's not much to do with how fast you go - it is about stretching the distance.
It's not about being so dead beat at the end you can't move - it is about pacing yourself round, so you finish in "good order" - maybe a bit creaky, but not too much.

Workout Time Being Lost in Training Peaks - and a workaround

Hmm, Running exactly at midnight?
I think not!
Yet this is how my run is displayed in Training Peaks.

14:52, according to Garmin Connect.

14:52, according to Strava

I had a nice run yesterday, but there was a problem.
I uploaded my data from my Garmin 310xt to our PC via the Ant+ dongle to Garmin Connect.
Garmin Connect then automatically cascades the data to Training Peaks and Strava.
So what was the time recorded by Garmin Connect?


So it looks like Training Peaks has corrupted the time data!
Oh.
So I contacted the TP contact email ...
And they asked for a screenshot, which I duly sent.

Then I got this reply:

Reply to the apparent bug I found in Training Peaks,

So there you have it.
It really is Training Peaks corrupting the data.

The problem:
I always do Eleveation Correction first, then use the Recalculate option occasionally to adjust my "zones" as appropriate after a look at the data.
That is what seems to be causing the loss of time data.

The "official" workaround:
However, for the time being, Training Peaks advises that if you are going to use Recalculte, you use that first, and then do the Elevation correction after

My simpler "unofficial" workaround:
Since the time data is already held by Garmin Connect, I can just look it up, and manually overwrite the default "midnight" time in the affected workout!


It seems this "timestamp" problem only shows up if you use both Elevation Correction and Recalculate on the same workout, in that order, so it isn't that much of an issue.
Anyone who recalcultes after every workout is making a lot of work for themselves for little benefit.
the only reason I am doing it is because after my recent crash, I was (am!) a lot less active, and so all my old thresholds don't mean a whole hill of beans. I need to train for who I am, not who I was!